FarmoDue FD30 – Production and packing of 30000 suppositories/h

The FarmoDue are automatic machines for the production of suppositories and ovules in strips of aluminium and/or thermoformable plastic. The cavities can be of different cut and volume according to the client’s requirements. Production up to 30.000 suppositories-ovules/hour.

Strengths of the FD30

Plastic and aluminium thermoforming with the same forming group.
Easy access for machine registration, cleaning and maintenance.
Change over is fast and easy, size parts memorization from display panel.
Convenient and small moulds with easy handling.
The dosing pump is very precise, easy to dismantle and clean, with manual check possibility.
Cooling tunnel: the translation logic with cut strips allows unified cooling with simple step step movements also giving easy access.

Description

INDUSTRY
30.000 supposte / ovuli all’ora
KIND OF PACKAGING
PRODUCTION
30.000 suppositories / ovules per hour
VOLUME SUPPOSITORIES AND OVULES
0,2 – 4 ml
FORMING MATERIAL
  • PVC – 100÷130 µm PVC+PE – (100÷130 µm) + (20÷30 µm)
  • PVDC – 100÷130 µm ALU+PE – (40÷50 µm) + (20÷30 µm)
  • PP+ALU+PE – (20÷30 µm) + (40÷50 µm) + (8÷12 µm)
  • Other materials following feasibility study
CAPACITY OF PRODUCT TANK
80 lt.
Tanks are also available with bigger volume capacity together with special version tanks on request.
STANDARD REELS
ø max. 500 mm
MAX FILM HEIGHT
73 mm
TUNNEL: DWELL TIME
  • 9 minutes (tunnel 2500 mm)
  • 11 minutes (tunnel 3000 mm, time with 1 tunnel)
  • 21 minutes (tunnel 3000 mm, time with 2 tunnel)
POWER SUPPLY
  • Electric: 400V – 50Hz (3p+N+PE)
  • Pneumatic: 6 bar
WORKING ENVIRONMENTLAVORO
  • Temperature Min. 15°C – Max. 30°C
  • Relative Humidity Min. 30% – Max. 70%
MIN COOLING TEMPERATURE (°C)

from 15°C to environment temperature

FRAME
Aluminium (parts in stainless steel)

Standard functions & Optional

  1. Forming. The cavities are formed from two strips of pvc or aluminium and they can be in different shapes.
  2. Lower trimming. The lower trimming is obtained with a shaped cutting die which also helps the opening of the strip.
  3. Dosing. The product is dosed with exact volumes at the dosing station and these volumes can be changed automatically.
  4. Product cooling. The strips of 28-30 suppositories pass through the cooling tunnel which has controlled cooling ventilation to solidify the product.
  5. Upper sealing. The strips are sealed on the upper part in such a way as to give the cavities airtight closure.
  6. Coding. Coding can be done on the last group of the sealing unit.
  7. Upper trimming. The upper edge of the strips are cut with circular blades.
  8. Pre-cutting and cutting. The strips 28-30 suppositories are cut into pieces which range from 1 – 7.

OPTIONAL EQUIPMENT
Automatic product weight check. Product recycling pump. Splice control device and micro hole check (only for PVC): stop mode in dosing pump phase and automatic ejection of empty and non-conformed strips at the end of tunnel. Removable hopper. Antistatic device for PVC. Print centring system only for PVC. Tank level checking device made by sensor and ultrasound reading or with floating level device. Coding digits for aluminium or pvc. Ink-jet coding group. Stacking unit for automatic coupling to the downstream cartoning machine.

Video FD

Machines of the same range