FIRST K7 40 CYCLES/MIN

BLISTERPACK & READY TO SHELF

PRIMA K7 BLISTERPACK & READY TO SHELF

Prima K7 is an automatic forming machine managed by PLC with single lane transfer, for the production of PET, PVC and polystyrene trays for blisterpack and ready to shelf products. The balcony structure allows maximum access for cleaning and inspection to all process areas of the package, the passage of the formed plastic and the product is always visible on the operator front. All the passages for electrical cables and compressed air pipes between the different areas are in the lower part of the structure (under the footboards) and in the rear part of the frame, from where it is possible to access for maintenance purposes the valves, the electrical junction boxes and all the on-board machine components. The electrical panel is fixed on hinges and its opening allows inspection along the entire length of the rear frame. Frame completely made of anodized aluminum and stainless steel. Reel holder integrated in the machine frame and reel insertion from the operator front. Use of FDA certified greases and oils.

Totally balcony structure for a complete separation between the drive groups and the functional groups. All the main movement groups are driven by servomotors so as to have a high positioning accuracy and an easy control of speed and acceleration with a quick adjustment of the steps. All motors are connected with a Profibus system. Allows parameterization from the display in machine cycle mode. 50 mm openings are present on both sides of the main assemblies when the machine is stopped. Allows additional distance from the heating elements and easier replacement of the piece. The servomotors allow the adjustment of the opening of the plate. According to the depth of the tray to optimize the cycle time of the machine. Form the load of the reel from the operator side. It allows for a more compact forming module and simpler reel change procedures. Integrated variable data product vision control system.

WITH OVER 45 YEARS OF EXPERIENCE, WE OFFER ALL-IN-ONE SOLUTIONS

FARMO RES SUPPORTS YOU THROUGHOUT YOUR PRODUCTION PROCESS

l 1

Progettazione

2

Costruzione

3

Installazione

4

Assistenza & Ricambi

PRIMA K7 BLISTER & READY TO SHELF card

NOTE THAT THE MACHINE CAN BE FULLY CUSTOMISED

Packaging Materials:

  • PVC
  • PET
  • PS
  • Other thermoplastic materials
Sectors of application

 

Forming area

  • FIRST K7-320-220: 320 mm (band width) x 220 mm (pitch)
  • PRIMA K7-320-260: 320 mm (belt width) x 260 mm (pitch)
  • PRIMA K7-400-220: 400 mm (belt width) x 220 mm (pitch)

Types of packaging

Blisterpack & Ready to shelf, especially in plastic and cardboard packaging

Max forming depth: 40 mm
Output: 40 cycles/min, variable according to the format
Standard reels: ø max 700 mm.
Core internal diameter 74÷78 mm.
Standard covering reels: ø max 300 mm.
Core internal diameter 74÷78 mm.
Machine height from the ground: 100 mm, variable according to interfacing
Work Environment: Temp. Min/Max 15°/30°C – Min/Max 30-70% relative humidity
Power supply: Electric 400V – 50Hz (3p + N + PE) / Pneumatic 6 bar
Frame: aluminium

Need more information?

FILL IN THE FORM, YOU WILL BE CALLED FOR FREE AND WITHOUT OBLIGATION, BY ONE OF OUR TECHNICIANS

Privacy Policy (*)

12 + 7 =

Where we work

WE SELL OUR MACHINES ALL OVER THE WORLD, SINCE 1964

All-in-One solutions

  • Engineering
  • Construction
  • Installation
  • Service & Spare Parts

Where we are

The headquarter and two production sites are in Montaletto di Cervia (RA), Italy. But thanks to our partners and dealers, we are present all over the world.
We Are Supplier of Technology